№	Name	Description
1.	Frame	Hot galvanizing of steel structures. Depth of steel 3 mm, welded from close rolled profiles.
2.	Protective coating	Lift galvanized iron coated by priming paint of 0,63 mm and plastic spraying of 200 micrometers. Protective coating on the other side. Floor boards are covered with galvanized steel with plastic coating – anticorrosive coating.
3.	Finishing
3.1	External finishing
	Walls	All external load-bearing profiles possess special shaping strip for fastening of external walls. Thanks to it absolute air-tightness is achieved.
3.2	Interior finishing
	Walls	Two sides, plastic, fibreglass slabs covered by film "light oak".
	Ceiling	Two sides, plastic, fibreglass slabs covered by film "light oak"
	Internal and external finishing is connected under pressure with polyurethane foam of 50 mm depth, sandwich assembly.
4	Insulation	Achieved due to uniform depth of high quality insulation material made mechanically.
	Roof	120 mm fibreglass, K = 0,312 W/gm*K
	Walls	50 mm rigid foam, K = 0,452 W/gm*K
	Floor	50 mm rigid foam, K = 0,438 W/gm*K
5.	Floors	Galvanized, lower frame is a weaving of special 120/95 mm profiles. Floor slabs are fastened on the surface of profiles. Floor structure under plates is reinforced with supplementary profiles of 90/110. Linoleum coating. Stands preserved. Plastic plinths.
6.	Windows	Plastic glazed windows with jalousies
7.	Roof	Galvanized upper part from weaving of special structure profiles of 180/55. Roof cover consists of fire-resistant steel sheets, 0,75 mm, mechanically processed into the form of trapezoid 40/184 and assembled onto the container with inclination
8.	Gutter	Covered with galvanized net. Mineral wool of 120 mm depth with aluminium foil is put under ventilated structure of trapezoid sheets for vapour and humidity insulation.